Hydra-Flex Aqua-Lab EVO User Manual - Manual (Page 10)

© Hydra-Flex Inc 2014 Page | 8
Recommended Maintenance
The recommended service and maintenance on the AQUA-LAB System are as follows.
Monthly
• Check air regulator
• Check water filter and replace as needed (if installed)
Semi-Annually
• Check and replace injector metering tips
• Check and clean wye strainer
• Inspect and replace chemical lines as needed
•
Ensure lines are tightly secured to injector hose barbs, clip 1” off old hose as needed that was stretched
by hose barb
Annually
• Clean water regulator
• Inspect motor starter for corrosion, if identified order replacement/spare parts
1-3 Years
• Inspect and replace injectors
• Replace water valves
• Replace main pressure regulator