Hydra-Flex Aqua-Lab EVO User Manual - Manual (Page 8)

© Hydra-Flex Inc 2014 Page | 6
Istobal M22 / M24 Initial Set Up
Application
Injector Nozzles
Pre Spray / 2 step 618098 – 3.25gpm 10x 0880, 4x 632.676
Shampoo 618086 – 2.25gpm 2x 0880, 10x 0680
Shampoo Rinse Flow Thru - 3000173 See shampoo
White Foam 618086 – 2.25gpm As Shipped
Triple Foam 3x 618070 – 1.5gpm each As Shipped
Wax / Super Wax 618096 – 3.25gpm 2x 632.676, 2x0880
Horns Rinse Flow Thru - 3000173 See Wax
Low Pressure Under Spray Flow Thru - 3000173 As Shipped
CTA TBD TBD
Bug Spray TBD TBD
Optimizing the System
Consistently achieve the desired cleaning and presentation/performance
using the least amount of chemical and water
Injectors vs. Metering Tips vs. Nozzles
The key to optimizing the system is through trial and error.
Don’t be afraid to try these steps to achieve your ideal performance.
What do injectors do?
o Increases or decreases the amount of water
in the solution
What do metering tips do?
o Increases or decreases the amount of
chemical in the solution
What do nozzles do?
o Determines the pattern and backpressure of
the solution