CAME Gard 8 230v A.C - Manual (Page 12)

12
T
h
e d
at
a a
n
d i
n
fo
rm
at
io
n p
rovi
d
ed
i
n
t
h
is
m
an
u
al
a
re to b
e c
o
n
si
d
er
ed
s
u
sc
ep
ti
b
le to c
h
an
g
e a
t a
n
y t
im
e w
it
h
o
u
t w
ar
n
in
g
, by CAM
E c
an
ce
ll
i a
u
to
m
at
ic
i S
.p
.A
.
ENGLISH
^—
^—
- The procedure is similar for the bar’s opening position. Adjust the closure
damper screw until a position parallel to the road surface is reached.
5.8 End stop adjustment
Power up the electric board, carry out a series of steps to make sure of the bar’s correct opening and closing positions, and
then, if necessary, proceed to the adjustment of the dampers.
Warning! For greater safety and better unit performance, the bar’s opening and closing operations should be carried out with
the inspection hatch closed!
- Execute the closing operation, adjust the open bar’s position
by turning the free damper clockwise (to increase the bar’s
run) or counter-clockwise (to decrease the run). Adjustment
of the position with a ~89° aperture from the closed position is
recommended.