Clear-Com HX System Frames - Manual (Page 23)

EHX runs on the following versions of Windows:
• Microsoft Windows Server 2003 SP2 (32 bit and 64 bit).
• Microsoft Windows Server 2003 R2 (32 bit and 64 bit).
• Microsoft Windows Server 2008 SP2 (32 bit and 64 bit).
• Microsoft Windows Server 2008 R2 (64 bit).
Note:
Only 64 bit is supported, as Windows Server 2008 R2 is not available for 32 bit.
• Microsoft Windows XP SP3 (32 bit and 64 bit).
• Microsoft Windows Vista SP2 (32 bit and 64 bit)
• Windows 7 (32 bit and 64 bit).
When running EHX on Windows operating systems, the client and server can run on
separate machines connected over a network. You can use EHX to perform a wide range of
configuration tasks, including:
• Assigning labels (names) to ports and user panels.
• Creating point-to-point and fixed group (partyline) communications between
connected audio devices.
• Enabling, limiting or disabling features of any connected user panel or card.
• Configuring connections between matrices.
Tip: The above list is not definitive. For more information about the capabilities of EHX, see
the EHX User Guide.
The EHX system can be set up to run on a client/server model over a network, allowing the
system administrator to control the matrix remotely.
23 Eclipse HX-Omega User Guide