Clear-Com HX System Frames User Manual

Page 84

Advertising
background image


D

Secondary Link Status LEDs

These LEDs indicate the status and functioning of the secondary (B) fiber
optic link.

ACT LED

When lit, this

yellow

LED indicates that the secondary fiber optic circuit is

active.

Link LED

When lit, this

green

LED indicates whether a link has been established on the

secondary fiber optic circuit (transceiver B). When illuminated a link is present.

ERR LED

When lit, this

red

LED indicates that an error condition has been detected on

the secondary fiber optic circuit.

TXVR LED

When lit, this

green

LED indicates when data is being transmitted on the

secondary circuit. It is illuminated when data is present on the circuit.

E

Status LED

The Status LED illuminates

solid red

when there is a communications failure

between the fiber card and the CPU card.

Matrix Data LED

The Matrix data LED

flashes green

to indicate successful communication

between the fiber master card and the CPU card.

Table 16: E-FIB front panel lights and controls


84

Eclipse HX-Omega User Guide

Advertising
This manual is related to the following products: