Condition, Control actions, Condition -16 control actions -16 – Clear-Com Logic-Maestro User Manual
Page 82
Advertising
Clear-Com Communication Systems
Eclipse Logic Maestro Instruction Manual
2 - 1 6
Figure 2-14: Script Library Categories
Condition
The condition objects allow the value or state of component
parameters to be tested, compared or converted from one format to
another. Conditions are AND and OR.
Figure 2-15: Conditions List
An example of the use of a condition is:
FRLY2.Triggerslf(crosspointControl,Condition.AND,AND1);
where control FRLY2 is triggered if the elements crosspointControl and
AND1 are both true.
Control Actions
Control actions allow the states of system components such as LEDs,
actions (for example when a key is pressed) and routes to be changed
for new actions and routes to be created.
Advertising