Clear-Com HME DX121 - Manual (Page 12)

8
BASE STATION SETUP
Basic Base Station Setup
The following description is for a basic, stand-alone DX121 One-to-One Wireless Intercom System setup.
Intercom headset, 4-Wire intercom and relay connections are described on page 22.
Set up the Base Station as follows:
Rear Panel
Front Panel
Step 1. Mount antennas -
Mount the two enclosed antennas on the antenna connectors on the rear panel of the Base Station.
Position the antennas at an approximate 90° angle. Turn the sleeve on each of the antenna connectors
clockwise to tighten it securely in place.
SECTION 2. EQUIPMENT SETUP
Approximate
90
° angle
12-14 VDC
power connector
Antenna connectors
Power light
Power button