Clear-Com Eclipse-Omega - Manual (Page 110)

Clear-Com
Eclipse Configuration Software Instruction Manual
4 - 2 0
command. Click on the ‘Yes’ button to remove the user or ‘No’ to
cancel the action.
Note: Always ensure that at least one valid network administrator
account is available to allow login to ECS and access to
user management. Normally ECS will prevent the deletion
of the account currently logged in and being used to access
User Management and as this must be a network
administrator account it would not be possible to delete all
network administrator accounts.
REMOVING GROUP MEMBERSHIP
To remove a group membership, ensure that a network administrator
is logged in to ECS to access user management.
1. Select the required User and then select Edit.
2. From the Groups this user belongs to, highlight the group and using
the left arrow transfer the level back into the ‘Available Groups’ box.
3. Select ‘Save’.
4. The updated user profile will be saved.
EXITING USER MANAGEMENT
To exit user management click on the ‘Close’ button at the bottom right
corner of the user management screen. The user management dialog
will be closed.