Hach-Lange 3400 sc - Manual (Page 18)

14
Installation
3.2.2 Mounting the Digital Gateway
The digital gateway is supplied with a mounting clip for mounting to a wall or other flat
surface. Use an appropriate fastener to secure it to the wall. After the sensor is wired to
the digital gateway and the two halves are threaded together, place the mounting clip over
the center of the digital gateway and squeeze the clip together to secure. See
Figure 12:
"Mounting the Digital Gateway" .
Figure 11: Digital Gateway Dimensions
Figure 12: Mounting the Digital Gateway
1. Mounting clip 3. Hex nut, ¼-28
2. Screw, pan head, ¼-28 x 1.25-in.es 4. Mount clip, insert digital gateway, squeeze clip closed.
184.15 mm (7.25 inches) 34.29 mm
(1.35 inches)