Figure 4 rubber fitting installation, Figure 5 place the sipper modul, Sipper module – Hach-Lange Sipper Module for DR 5000 User Manual

Page 4

Advertising
background image

4

Sipper module

4.

Open the cell compartment. Without the locking screws, insert the Multi Cell Holder
into the cell compartment (refer to the user manual).

5.

Place the Sipper Module on the Multi Cell Holder in such a way that the screw holes
are positioned exactly one above the other and the top of the lid of the Sipper Module,
when opended, will be facing towards the back of the instrument.

Figure 4 Rubber fitting installation

Figure 5 Place the Sipper modul

Advertising
See also other documents in the category Hach-Lange Equipment: