Figure 7 sipper module with tubes in place, Figure 7, Sipper module setup – Hach-Lange Sipper Module for DR 5000 User Manual
Page 6: Sipper module
Advertising
6
Sipper module
Sipper Module Setup
When a Sipper Module is installed,
SIPPER OPTIONS
icon is available in Instrument Setup.
1.
From Instrument Setup, press
SIPPER OPTIONS
.
2.
Enter the times for the listed parameters.
Figure 7 Sipper module with tubes in place
1
Pump Tubing (white)
4
Sample/Inlet Tubing
2
Drain/Waste Tubing
5
Pour-Thru Cell
3
Guide tube
6
Outlet Connector (from pump to drain)
Advertising