2 edit/delete of barcode-readable application, Standard operations – Hach-Lange DR 5000 User Manual User Manual
Page 62
Advertising
62
Standard Operations
5.5.8.2 Edit/delete of barcode-readable application
To edit a barcode-readable application:
1. Press Stored Programs in the Main Menu and select a
program.
a. Press Program Options and then Edit.
b. Insert the LCW 906 cuvette and close the cell
compartment, press Options>More>Edit.
2. A data overview of the corresponding application is displayed.
3. Highlight the corresponding line in the data overview and press
Edit.
General advices regarding the programming respectively updating
of program data, see
To delete a barcode-readable application:
1. Press Stored Programs in the Main Menu and select a
program.
2. Press Program Options and then Delete.
Advertising