2 adjusting the contrast, 2 routine operation, Instrument use – Hach-Lange DRB 200 Thermostat User Manual
Page 16
16
Instrument Use
2.
Press the right arrow key to scroll through the menu.
Select the required language (see Table 1).
3.
The instrument is automatically initialized and is then
ready for operation.
2.1.2
Adjusting the Contrast
1.
Hold down the middle key while switching on the
instrument.
2.
Use the up and down arrow keys to adjust the contrast.
3.
Press OK to accept the changes.
2.2 Routine Operation
1.
Switch on the instrument.
2.
Select the required temperature program using the
appropriate keys (see section 2.4 on page 17).
3.
Prepare the test vials as described in the analysis
procedure.
4.
The instrument will be heated to the set temperature.
Two beeps indicate that the required temperature has
been reached.
Language
S
PL
Language
E
NL
Language
F
I
Language
GB
D
Table 1 Language Settings
Abbreviation
Country
GB
English
D
Germany
F
France
I
Italy
E
Spain
NL
Netherlands
S
Sweden
PL
Poland
DK
Denmark
COD
TOC
Start
Start
80°C
TOC
Start
150°C
TOC
Start
Start
150°C
TOC
87’
Start