Hach-Lange DRB 200 Thermostat - Manual (Page 29)

29
Certification
Hach Company certifies this instrument was tested
thoroughly, inspected and found to meet its published
specifications when it was shipped from the factory.
The DRB 200 has been tested and is certified as indicated to
the following instrumentation standards:
Product Safety:
Certified to EN 61010-1 A1 / A2 & EN 61010-2-010 A/1 per
73/23/EEC LVD by TUV (Rheinland) with TUV-GS safety
mark.
Listed to UL 61010A-1/UL 61010A-2-010 and CSA C22.2
No. 1010.1 A2 and CSA C22.2 No. 1010.2.010A by TUV
(Rheinland) with cTUVus safety mark.
Immunity:
EN 61326 A1/ & A2 (EMC Requirements for equipment
for measurement, control and laboratory use) per 89/336/
EEC EMC: Supporting test records by Hach Company,
certified compliance by Hach Company.
Required Standard/s include:
EN 61000-4-2 (IEC 1000-4-2) Electro-Static Discharge
EN 61000-4-3 (IEC 1000-4-3) Radiated RF Electro-Magnetic
Fields
EN 61000-4-4 (IEC 1000-4-4) Electrical Fast Transients/
Burst
EN 61000-4-5 (IEC 1000-4-5) Surge
EN 61000-4-6 (IEC 1000-4-6) Conducted Disturbances
Induced by RF Fields
EN 61000-4-11 (IEC 1000-4-11) Voltage Dips, Interruptions
and Variations
Emissions:
Per 89/336/EEC EMC: EN 61326:1998 (Electrical
Equipment for measurement, control and laboratory use-
EMC requirements) Class "B" emission limits. Supporting