INSTEON KeypadLinc Dimmer, 8 button (2486DWH8) Manual User Manual
Page 23
Page 23 of 24
Rev: 1/21/2014 7:36 AM
Controller can turn off
KeypadLinc, KeypadLinc
does respond to On
KeypadLinc may be Added to
a Scene at its off state
Add KeypadLinc to Scene again at desired
Scene on-level
KeypadLinc trips the Arc
Fault Circuit Interrupter
(AFCI)
The AFCI might be too
sensitive
Replace your AFCI with a less sensitive
brand/model
Note: Smarthome has conducted testing and
has found that KeypadLinc modules do not trip
when used with the following AFCI models:
• GE 15 Amp Combination Arc Fault
Breaker #THQL1115AFP2
• Murray 2-Pole Combination Type Arc Fault
Circuit Interrupter #MP215AFCP
Install
between the
output and the Load
There might be loose
connections within your
home's wiring
Consult an electrician to check the wiring in
your home
KeypadLinc still controls
devices even after factory
reset
Scene memberships exist in
the Responder
Remove Responder from KeypadLinc Button
If you have tried these solutions, reviewed this Owner's Manual, and still cannot resolve an issue you are
having with KeypadLinc, please call: 800-762-7845