Jungheinrich ETV_110-112 - Manual

Drive, lift and steering motors
use 3-phase AC technology
Optimised vehicle geometry
saves space
Electric 180° steering
Sensitive hydraulic operation
with SOLO-PILOT control
lever
Optimum stability with Curve
Control
ETV 110/112
Electric reach truck (1,000/1,200 kg)
Space-saving design, high performance
data and optimum ergonomic working
conditions. These are the strengths of
our reach trucks ETV 110 and ETV 112.
Advantages:
• Saves space with narrow working aisles
from 2,659 mm (as per VDI, when
picking up a pallet lengthways). With
its slim support arms, the ETV 110/112
can pull a lengthways Euro pallet back
between the support arms – despite its
compact outer width of only 1120 mm.
This creates more room during oper-
ation with oncoming traffic in block
warehouses or in drive-in racking.
• Higher throughput – as well as in-
creased availability – due to consistent
use of 3-phase AC technology for all
drive motors.
• Relaxed operators thanks to perform-
ance-enhancing ergonomics. The
operator is immediately aware of the
added comfort: Via the lowered entry
step, they are able to comfortably ac-
cess their 3-way adjustable seat with
an adjustable armrest and a steering
wheel adjustable in both horizontal and
vertical directions.
• Automatic speed reduction when cor-
nering. Curve Control limits the maxi-
mum travel speed and acceleration
when cornering. The risk of rocking or
even tipping over is drastically reduced.
Our 110 and 112 reach trucks provide the
best solution for cost-effective stacking
and retrieval at high lift heights and in
confined spaces. Whatever the need
– handling pallets, operating in drive-
through or drive-in racking, in extremely
narrow areas or with low clearance
heights, for single shift or multishift
applications – our 110 and 112 reach
trucks are the perfect solution for every
application.