Jungheinrich ERC_212z–214z-216z - Manual

Powerful and efficient with
maintenance-free AC drive
motor
Electronically controlled
hydraulic motor for sensitive
lifting and lowering
Electric tiller and Curve
Control ensure easy steering
Safe travelling position with
side arms (optional)
Additional support arm lift
gives increased ground
clearance
Fast lifting of light loads with
Lift-Plus (optional)
ERC 212z/214z/216z
Electric pedestrian stacker with support arm lift (1,200/1,400/1,600 kg)
The ERC 212z/214z/216z electric pedes-
trian stacker combines the manoeuvr-
ability of a pedestrian stacker with the
option to work comfortably and quickly
as a stand-on truck. The electronically
controlled lift motor ensures quiet and
gentle lifting and lowering of loads at
the touch of a button. It also features a
powerful 24-volt AC drive motor. The
optimum efficiency of this motor ensures
powerful acceleration and high speeds
combined with low consumption levels.
The support arm lift is a special feature:
It ensures effortless operation on uneven
floors and ramps with additional ground
clearance – even with full load. Two pallets can also be transported at the
same time, thus doubling throughput
compared to transporting one pallet
(optional).
With the ride-on option, the ERC also
offers cost-effective handling/trans-
port of goods over longer distances. The
sprung stand-on platform relieves the
strain on the operator. LiftPlus (optional)
enables the ERC 214/216 to achieve a
significantly higher lift speed when lifting
the forks with a light load (up to 400 kg)
in comparison with the standard version.
Depending on the application, an
additional speed version is available
(optional): The 9-km/h version: This model of the ERC comes with side arms
which help keep the operator safe on the
stand-on platform even when cornering.
It is ideal for transport over longer dis-
tances.
Batteries with capacities of up to 375
Ah plus the option of lateral battery ex-
change for multishift operation ensure
that the ERC will not run out of power
even when working in the most chall-
enging conditions. A built-in charger
(optional) allows easy and reliable battery
charging at any standard 13 Amp mains
socket.