Jungheinrich EFG_110-113-115 - Manual

Compact, three-phase AC
rear-wheel drive fork lift truck
Maximum performance with
lowest energy consumption
Only 990 mm wide for block
stacking
Spacious work area
SOLO- or MULTI-PILOT
control lever (optional)
Processor-controlled AC
electronics which can be
updated
EFG 110/110k/113/115
Electric three-wheel truck (1,000/1,250/1,500 kg)
Rear-wheel drive, compact design, high
performance data, and optimum ergo-
nomic working conditions. These are the
strengths of the Jungheinrich electric
three-wheel trucks EFG 110k/110-115.
Advantages: Manoeuvrability, optimum
performance working inside HGVs, con-
tainers and wagons gives a high level of
operator comfort.
This begins with the low entry height of
just 520 mm. The operator enters easily
and securely onto the operator station.
The adjustable steering column and the threeway adjustable comfort seat offer
individual adjustments for all operators.
The comfort high roof has a height of
2090 mm and offers superior headroom
(‘container roof’ with a height of 1970
mm is available as an option). Excellent
all-round visibility enhances safety; the
ergonomically positioned hydraulic
levers to the right of the driver’s seat
with the SOLO-PILOT (lifting/lowering,
change in direction of travel and horn in
one lever) fit easily to hand. The comfort
display is configured for viewing when looking in the direction of the forks.
Using clear text displays, it provides
data on operating hours and the battery
charge (including lift cut-out) and stores
all the relevant service data.
With low steering / lever positioning
forces and a conventional accelerator
/ brake pedal configuration, the power
generated by the 3-phase AC motor,
encapsulated as per IP 54, is easily trans-
formed into dynamic, smooth acceler-
ation. For use both indoors and out-
doors.