AT&T AUDIX Networking 585-300-903 - Manual (Page 180)

13-26 AUDIX System Administration
________________________________________________________________________________________________
________________________________________________________________________________________________ ________________________________________________________________________________________________
3. Log back on to system 2 using an administration or maintenance terminal and add the subscriber(s)
using the subscriber : local form.
4. From a voice terminal, log in to system 2 using the administrator’s login. Go to voicing in the name
and record the subscriber’s name.
If the name-record-by-subscribers feature is used, names will not be recorded until the first time
subscribers log in to the AUDIX system.
5. Run a connection test from system 2 to all other systems and from all other systems to system 2. (Or
wait for the transmission intervals.)
6. Log in to system 1 using an administration or maintenance terminal. Look at the subscriber :
remote form to see that the subscriber(s) is now listed as a remote subscriber(s). If the
subscriber(s) is not listed, check the system : log form for ‘‘a full update has been requested’’.
If this is the case, you must do a full update from system 1 to system 2 using the system :
translation : remote updates form.
7. Repeat step 6 for the other systems remote to system 2.