KP Electronic Systems ATS100 - Manual (Page 2)

Alarm Panel Interface
To ensure a fully redundant alarm monitoring system, KP's LARS network operates
simultaneously with phone line receivers in a primary/secondary configuration.
Alarm messages are sent using KP’s innovative DI100, a dialer interface that
communicates full zone and panel information from any alarm panel via KP’s radio
transmitters.
Messages are sent without interfering with phone line connections guaranteeing
radio and line receivers work independently, and that alarm and system messages
are sent at the same time.
Field Programmer Unit
Using KP's handy, pocket-sized FTU100 field programmer, parameters
within KP's radio units are viewed and changed on-site. Unit address, input
polarity and periodic test timing are quickly and effortlessly updated.
Signal Strength Monitor
The FTU101 measures and displays signal strength of KP's ATS100
transmissions to repeaters or central stations. An invaluable tool for expanding
radio networks while in the field.
PC Utility Software
The user friendly GUP5000 software for Windows enables on-site programming of
all key ATS100 parameters. The software is designed for programming frequency
and message repetitions and incorporates a user password feature ensuring authorized
access.
Head Office:
P.O. Box 42,
Tefen Industrial Zone, 24959, Israel.
Tel: 972-4-9873066, Fax: 972-4-9873692,
[email protected]
US Office:
109
Tudor Drive, North W
ales, P
A
19454. U.S.A
T
el: (888) 542-7460, Fax: (215) 542-7461,
[email protected]
www
.kpsystems.com
100mm
(4”)
166mm(6.5”)
32mm
(1.3”)
Specifications
Innovations For Installers:
RF Transmitter
General
Models ATS100 TM ATSU100 TM
Power Supply
Frequency
Modulation
Power Output
Frequency Stability
Spurious Emission
(below carrier)
Deviation
(factory adjusted)
Encoding
Weight
Digital Encoder
DC Input 10-15 VDC, 16mA standby, 1 A max during transmission
136-174 410-504 MHz synthesized into five
sub-bands:
low 410-450 MHz [P.N ATSU100L]
edium 450-470 MHz [P.N ATSU100M]
high 470-4504Hz [P.N ATSU100H]
FM, FSK and PWM
5W
-75dB
Output Impedance 50W BNC connector
32 bit words in LARS and LARS I protocol with BCH and PARITY
0.6 kg (1.3lbs)
5 KHz max
2.0 KHz for 12.5 KHz bands
3.3 KHz for 25 KHz bands +-
5 ppm at - 30oC to 60oC (-23oF to 141oF) +-
+-
+-
Size 32x100x166mm (1.3”x4”x6.5”)
Physical Dimensions
Operating Temperature
Storage Temperature -30oC to 60oC (-22oF to 140oF)
-40oC to 70oC (-40oF to 158oF)
2W
CE CE
-60dB -75dB -60dB
136-174 445-465 MHz
[P.N
ATSU100CE]
FCC FCC
10W
ATS100P TM
64 bit words in
LARS II protocol