KP Electronic Systems BSRU100 - Manual (Page 2)

Head Office:
P.
O. Box 42,
Tefen Industrial Zone,
Tefen, 24959, Israel.
Tel: 972-4-9873066, Fax: 972-4-9873692,
[email protected]
US Office:
109
Tudor Drive, North W
ales, P
A 19454.USA,
Tel: (215) 542-7460, Fax: (215) 542-7461,
[email protected]
www
.kpsystems.com
169mm (6.6”)
150mm (5.9”)
44mm
(1.7”)
Specifications
BSR100 TM installed inside SMR5000 TM Repeater unit
BSR100 TM installed inside EXR5000 TM Transciever unit
Models BSR100 TM VHF BSRU100 TM UHF
Power Supply
Sensitivity
Selectivity
Image Rejection
Data/Audio In Impedance
Data/Audio Out Impedance
Channel Switching
VHF
0.25 m V, -117dBm [12db sinad]
60dB for 12.5KHz, 70dB for 25KHz
65dB min
1KW
“ON THE FLY” via 15-pin rear panel connector with 20msec settling time
Operating Temperature
Storage Temperature
General
-30
o
C to 60
o
C (-54
o
F to 108
o
F)
Frequency
Channel Spacing
136-155 MHz [P.N BSR100L]
155-174 MHz [P.N BSR100H]
FM, FSK and DFM Modulation
Frequency Stability 2.5ppm @ -30
o
C to 60
o
C (23
o
F to 140
o
F)
-70dBc Spurious Emission
10 kbytes per sec on 12.5KHz channel and 20 kbytes per second
on 25KHz channel
Modulation Acceptance
Bandwidth
RF Output Impedance
50W BNC connector, single or seperate connector for receive
and transmit
Max Deviation 5.5 KHZ
DC input 10-15 VDC, 140mA standby, 3A max during
transmission
>100KW
Control Connector Rear panel: 15 Pin D type with: PTT, CM Audio In, Audio Out,
Data In data Out and Programming.
Front panel: 10 Pin Header for Control and Programming
synthesized in sub bands UHF
410-430 MHz [P.N BSRU100L1]
430-450 MHz [P.N BSRU100L]
450-470 MHz [P.N BSRU100M]
470-490 MHz [P.N BSRU100H]
490-510 MHz [P.N BSRU100H1]
10 Watt Nominal@ 12.5 VDC Power Out
12.5KHz; 25KHz
+-
+-
-40
o
C to 80
o
C (-72
o
F to 144
o
F)
Using PC utility program GUP10 TM via 10 pin front panel connector
RF Receiver
Programming
RF Transmitter
Size
Weight
169x150x44mm (6.6”x5.9”x1.7”)
0.65 Kg (1.44 Lbs)