KT&C K9-a Series - Manual (Page 34)

K9-a Series Manual
K9-a Series Manual
34
Control spot output on rear panel. By using additional monitor, event triggered video display and
sequence display are available.
[1] Mode
• Sequence : Display videos of selected channels in order.
• Event : Display event triggered channel.
• Seq+Event : If an event is triggered, it shows the triggered video first and then videos
display in sequence.
[2] Display Time : Set time per channel applied in sequence display.
4-5. TV Adjustment
[1] Aspect Ratio : Output is selectable between 2 x 4:3 (800x600, 1024x768) and 2 x 16:9
(1920x1080, 1280x720) ratios.
[2] Monitor : Change the OSD menu location.
• Composite : When using analog low-resolution monitor.
• NORMAL : When using 720p monitor
• VGA : When using high resolution monitor for VGA or HDMI (1080p mode)
▒ Chapter 5. Network Setup ▒