KT&C K9-a Series - Manual (Page 47)

K9-a Series Manual
K9-a Series Manual
47
▒ Chapter 8. Event Setup ▒
8-1. Sensor
It is for sensor setup.
[1] Sensor Input : Select the sensor input channel.
[2] On/Off : Select the sensor usage.
[3] Input Type : Select the sensor input type.
• N/Open (NORMAL OPEN) : The contact is normally open but close when the signal is
generated.
• N/Close (NORMAL CLOSE) : The contact is normally closed but open when the signal is
generated.
[4] Related camera : Select the camera to be related with sensor. Multi-selection is possible.
8-2. Motion Detection
It is the motion detection setup menu.
[1] Channel : Select the motion detection channel.
[2] On/Off : Select the motion detection usage.
[3] Sensitivity : Select the sensitivity of motion detection. Please apply it after the actual testing.
[4] Detection Area : Select the motion detection area. ( 1~5 )