KT&C K9-a Series - Manual (Page 35)

K9-a Series Manual
K9-a Series Manual
35
5-1. IP Address
This setup allows user to connect DVR to the network so that it can be viewed at remote location.
The user must know whether their internet is dynamic IP (DHCP) or fixed (static) IP. Please check
with your Service Provider (ISP) before setup.
[1] DHCP : “ON” for dynamic IP user.
“OFF” for static IP user.
[2] IP Address : Input the IP address.
[Example]
• IP address : 61.250.152.050
• Subnet Mask : 255.255.255.000
• Gateway : 61.250.152.001
• DNS Address : 164.124.101.002
[3] DDNS Address : Do not change the DDNS server IP (61.250.157.15)
[4] Use Port : Default port is 3000.
[5] Upnp : If a router supports Upnp, it automatically set port forwarding.
[NOTE] In case of using the router, the user should make port forwarding.
The port forwarding procedure is described in the router manual.
5-2. Notification