KT&C K9-a Series - Manual (Page 42)

K9-a Series Manual
K9-a Series Manual
42
The touring number is selectable 1~16.
[1] Touring number : Select the number.
[2] Preset number : Select the preset number saved before.
[3] Touring interval : Select the touring dwell time in seconds.
[NOTE] PTZ protocol selection
Protocol is PTZ moving driver. The protocol is registered as per the camera model name or
protocol name. Please check whether your PTZ is usable for this DVR. The touring is
supported when the camera itself supports the touring function.
 KT&C KPT-SPDN300NUCH support Pelco-D protocol with default ID 1 and baudrate
of 2400.
6-4. How to use PTZ
[How to call the PTZ menu]
• Mouse menu : Click the right button of mouse and select the „PTZ‟.
• Remote controller menu : Click the “PTZ” from remote controller.
(1) Select PTZ Button on the remote controller