KT&C KVR-H Series - Manual (Page 27)

27
[1] DHCP : It uses for dynamic IP user (On).
The static IP user does not need the DHCP function (Off)
[2] IP Address : The dynamic IP user does not set it up.
If you use the static IP, input the following information after ask it to ISP.
[Sample]
ㆍIP ADDRESS : 192.168.010.003
ㆍSUBNET MASK : 255.255.255.000
ㆍGATEWAY : 192.168.001.001
ㆍDNS : 168.124.101.002
[3] DDNS address : It is for dynamic IP user, do not change the DDNS address.
Basic using port is 2000( static IP user doesn’t have to care for this)
[NOTE] If dynamic IP user uses the router, the user should do the port forwarding if he uses
the router. The port forwarding function is described on the router manual.
[4] The bandwidth can be selectable as per the network speed for smooth image streaming.
- HIGH : It streams as per the current record setup.
- MIDDLE: It streams middle level from the current record setup.
- LOW: It streams low level from the current record setup.
☞ 3 different level of Bandwidth can be additionally adjustable
[5] Dual stream
∙ Use : Max 120fps can be transmitted through the internet.
∙ Not use: Max 480fps can be transmitted according to the network speed