KT&C KVR-H Series - Manual (Page 33)

33
Serial Port
Select the PTZ communication port( RS-232 or RS-485)
Revers Control
▷ PAN : Select the reverse movement of PAN (right and left).
▷ TILT : Select the reverse movement of TILT (up and down).
Speed
▷ Pan Speed : Speed control of right and left
▷ Tilt Speed: Speed control of up and down
▷ Zoom Speed : Speed control of Zoom
▷ Focus Speed : Speed control of focus
▷ IRIS: Iris control
Changed ID
▷ In some PTZ camera, you may not changed the ID manually. In this case, the ID can be
changed from the DVR.
- Click the ID view to see the current ID of PTZ
- Input the new ID to the ‘New ID’
 Click ‘APPLY’
[NOTE] PTZ protocol selection
Protocol is PTZ moving driver. The protocol is registered as per the camera model name or
protocol name. Please check whether you PTZ is usable for this DVR.
PTZ touring is moving the saved/memorized position by sequence.
PTZ touring