KT&C KVR-H Series - Manual (Page 34)

34
[1] Select Channel.
[2] Select the PTZ preset as per the number and select the speed to move.
[3] Select the moving speed.
[3] Maintain : Select the time to hold the camera movement after camera moved to this
location.
If you call the touring after above setup, the PTZ moves to the saved position by sequence.
How to call the PTZ menu.
The PTZ camera should be installed and selected from DVR.
(1) Menu call from front panel : Select the PTZ camera installed channel and press ‘PTZ’ then,
it will show “+”
How to use PTZ