CognitiveTPG CRx User Manual
Page 20
16
Chapter 2: Getting Started
Figure 2-24. Unlatching the Printhead Mechanism
Next, raise the printhead mechanism fully. Refer to the figure below.
Figure 2-25. Fully Raised Printhead Mechanism
CLEANING NOTE: THIS IS THE IDEAL POSITION FOR CLEANING THE PRINTHEAD,
PRINTHEAD SHIELD, AND PLATEN.
FOR MORE INFORMATION ABOUT CognitiveTPG APPROVED CLEANING SUPPLIES,
PLEASE REFER TO THE CognitiveTPG WEB SITE.
Next, insert the ribbon supply roll. Lift the ribbon supply roll, as shown in Figure 2-26,
with one hand as it currently is positioned with the CognitiveTPG leader text showing.
Examine the ends of the ribbon supply roll and notice the notches on the roll. These
notches fit into the printer. Refer to Figure 2-27 for clear pictures of the notches.