CognitiveTPG CRx - Manual (Page 21)

17
Chapter 2: Getting Started
Figure 2-26. Ribbon Supply Core Notches
Figure 2-27. Lining up Ribbon Supply Core Notches with Supply Spindle Notches
While holding the ribbon in place, pull gently on the green supply spindle to insert the
ribbon supply roll into place.
Figure 2-28. Pulling Out the Ribbon Supply Spindle
Place the ribbon supply roll into position as shown in Figure 2-29 below. Line up the
notches on the ribbon supply roll with the printer supply spindle notches to secure the
ribbon supply roll into place.