CognitiveTPG CRx - Manual (Page 75)

71
Chapter 11: Cleaning and Preventive Maintenance
Chapter 11: Cleaning and Preventive Maintenance
The C Series printer is designed to provide exceptional service with a minimum of
preventive maintenance. CognitiveTPG recommends cleaning the printer on a regular
basis using standard CognitiveTPG printer parts and cleaning supplies.
Cleaning Instructions
C Series Cleaning Supplies
Part # Size (inches) Items per box Description
14-00-0002 none 12 Cleaning pen
Exterior is cleaned with a lint-free cloth and, if necessary, a mild detergent solution.
Interior components (printhead, platen roller, media sensor, peel bar, ribbon, and media
paths) are cleaned with a 98% to 99 % pure isopropyl or denatured alcohol or a cleaning
pen every 20,000 inches (508 m) or blown air to remove any particles. The printhead
should be cleaned every 5,000 inches if pre-printed labels are used.
Figure 12-1. C SERIES Performing Printer Maintenance
1) Open the print mechanism. Turn the printer off when cleaning the printhead. Make
sure the printhead is completely dry before turning the printer back on.
Figure 12-2. Cleaning the C Series Printer Parts
A
B
C&D