CTEK MXS 4003 - Manual (Page 12)

12
LIMITED wARRANTY
CTEK SWEDEN AB, Rostugnsv. 3, SE-776 70 VIKMANSHYTTAN, SWEDEN issues
this limited warranty to the original purchaser of this product. This limited warranty is
not transferable. The warranty applies to manufacturing faults and material defects
for 5 years from the date of purchase. The customer must return the product together
with the receipt of purchase to the point of purchase. This warranty is void if the
battery charger has been opened, handled carelessly or repaired by anyone other
than CTEK SWEDEN AB or its authorised
representatives. One of the screw holes in the
bottom of the charger is sealed. Removing
or damaging the seal will void the warranty.
CTEK SWEDEN AB makes no warranty other
than this limited warranty and is not liable for
any other costs other than those mentioned
above, i.e. no consequential damages.
Moreover, CTEK SWEDEN AB is not obligated
to any other warranty other than this warranty.
DECLARATION OF COMPLIANCE
CTEK SWEDEN AB, Rostugnsvägen 3, SE-776 70 VIKMANSHYTTAN, SWEDEN.
Hereby declares under sole responsibility that the MULTI XS 4003 battery charger,
to which this declaration relates, conform with the following LVD standards:
EN60335-1, EN60335-2-29 observing the provisions of directive 2006/95/EC.
This product also conforms with the following EMC standards: EN55011,
EN 61000-3-3, EN 61000-3-2, EN 55014-1 and EN 55014-2 observing the provisions
of directive 2004/108/EC. The battery chargers conform with the requirements in
EN 50366:2003.
The chargers are available in a range of models with different mains cables.
The charger with the flat Euro connector is designed for Switzerland.
VIKMANSHYTTAN, SWEDEN 2009-10-01
Jarl Uggla, President
CTEK SWEDEN AB,
Rostugnsvägen 3
SE-776 70 VIKMANSHYTTAN, SWEDEN
Fax: +46 225 351 95
www.ctek.com