Acer Altos R300 - Manual (Page 51)

37
Installing an expansion card
This section explains how to install an expansion card. The onboard
expansion slots support PCI (Peripheral Component Interconnect)
cards.
Note: The BIOS setup automatically detects and assigns resources
to the new device (applicable only to Plug-and-Play expansion
cards).
To install a PCI card on PCI slot 1
1 Remove the system cover. See “Removing the system cover” on
page 35 for more information.
2 Loosen the thumbscrew on the add-on card metal bracket (1), then
lift up the metal bracket from the housing (2).
3 Remove the expansion slot bracket on one side of the metal
bracket.
aa r300.book Page 37 Tuesday, March 11, 2003 9:42 AM