Impulse 2105R User Manual
Page 21
Advertising
![background image](/manuals/336020/21/background.png)
On the ‘Port Information’ tab, select the COM port you want to test and
click on the ‘Open’ button. (See image below)
Click the ‘Settings’ button to open the COM Properties menu. Change
your parameters to 9600 bits per second, 8 data bits, no parity, 1 stop bit,
and no flow control, as pictured below.
Click ‘Apply’ and ‘OK’.
© Sealevel Systems, Inc.
- 19 -
SeaLINK+232-DB9 User Manual
Advertising