Impulse 2105R - Manual (Page 26)

© Sealevel Systems, Inc. - 24 - SeaLINK+232-DB9 User Manual
Appendix E – Compliance Notices
Federal Communications Commission Statement
This equipment has been tested and found to comply with the limits f
Class A digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency
energy, and if not installed and used in accordance with the instruction manual, may
cause harmful interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference, in such case the user will be
required to correct the interference at the user’s expense.
or
EMC Directive Statement
Products bearing the CE Label fulfill the requirements of the EMC
directive (89/336/EEC) and of the low-voltage directive (73/23/EEC)
issued by the European Commission.
To obey these directives, the following European standards must be met:
EN55022 Class A – “Limits and methods of measurement of radio interference
characteristics of information technology equipment”
EN55024 – “Information technology equipment Immunity characteristics Limits and
methods of measurement”.
EN60950 (IEC950) – “Safety of information technology equipment, including
electrical business equipment”
Warning
This is a Class A Product. In a domestic environment, this product may cause
radio interference in which case the user may be required to take adequate
measures to prevent or correct the interference.
Always use cabling provided with this product if possible. If no cable is provided or
if an alternate cable is required, use high-quality shielded cabling to maintain
compliance with FCC/EMC directives.