Laurel Electronics LAUREATE SERIES COUNTER_TIMER - Manual (Page 14)

A - b calculates total for
input A (I2), total for input B
(I3), and difference of both
inputs (I1)
A . b calculates total for
input A (I2), total for input B
(I3), and product of both in-
puts (I1)
A / b calculates total for
input A (I2), total for input B
(I3), and ratio of both inputs
(I1)
A to b calculates time
from input A (leading or trail-
ing edge of signal) to input B
(leading or trailing edge of
signal) . Display in mS or
clock format (I1).
A to A calculates time
from input A leading edge to
leading edge or trailing edge
to trailing edge.
A to b calculates time
from input A (leading or trail-
ing edge of signal) to input B
(leading or trailing edge) .
A to b calculates phase
angle of input A to input B
VALUE SELECT KEY MENU KEY DIGIT SELECT KEY
DUAL CHANNEL SIGNAL CONDITIONER
InPut
Input signal type (cont'd)
InPut
Input signal type
quAdr
Input from quadrature
encoder
Basic counter: total
Extended counter: total or
rate
totAL
Total (cont'd)
Note:
Use A-B for up/down count-
ing where input A is the up
counts and input B is the
down counts.
Basic counter:
A b, A Only
Extended counter:
All items shown
ti Int
Time interval
StoP t
Stopwatch
Extended counter only
PHASE
Phase angle
Extended counter only
QUADRATURE INPUT
-12-
totAL calculates total or
position (I1)
rAtE calculates rateand
direction(I1) or total (I1)