Lectrosonics UT200c - Manual (Page 2)

INTRODUCTION
Thank you for selecting the Lectrosonics UT200C hand-held wireless transmitter. The
UT combines over 80 years of engineering experience with the very latest components
in a design that addresses the most demanding professional applications.
The design of the UT200C was the direct result of numerous conversations with users,
staging and touring companies and dealers across the US. The specific concerns and
needs brought up in these conversations led directly to the development of the opera­
tional features offered on the UT200C. Two hundred fifty six frequencies are user
selectable in 100kHz steps to alleviate interference problems in travelling venues
The UT200C is an integral microphone/transmitter with an internal antenna. The
antenna is a dipole type utilizing the two printed circuit boards as the elements. The
housing is composed of durable PVC, machined to a natural, comfortable shape.
Internal mechanical parts are machined aluminum.
Only the UT200C transmitters are covered in this manual. Companion receivers are
covered in separate manuals. The UT200C will operate with any 200 Series Lectroson­
ics receiver in the same frequency group.
TABLE OF CONTENTS
INTRODUCTION .................................................................................................. 2
GENERAL TECHNICAL DESCRIPTION ............................................................ 3
CONTROLS AND FUNCTIONS .......................................................................... 5
BATTERY INSTALLATION ................................................................................... 8
OPERATING INSTRUCTIONS ............................................................................ 9
OPERATING NOTES ........................................................................................... 9
ADJUSTING THE TRANSMITTER FREQUENCY ............................................ 10
TROUBLESHOOTING ....................................................................................... 11
SPECIFICATIONS .............................................................................................. 12
SERVICE AND REPAIR ..................................................................................... 13
RETURNING UNITS FOR REPAIR ................................................................... 13
WARRANTY ......................................................................................... Back cover
2