Lectrosonics UT200c - Manual (Page 7)

Frequency Agile Handheld Transmitter
attenuation or the highest signal level. “0” is maximum attenuation or the lowest signal level. For the maximum amount
of headroom, set the switch to “0.”
Note: The attenuator should not be used as a level control. The Audio Level control inside the battery
compartment is the main level control. Adjust the attenuator only when the Audio Level control is turned
completely down and more headroom is still needed. Be sure to set the attenuator back to its original
setting for normal operation.
UT200 Bass Filter
20
0dB
-20
-40
-60
-3dB @ 71Hz
-20dB @ 50Hz
10Hz 100Hz 1KHz 10KHz
ATTENUATOR
Rio Rancho, NM - USA 7