Lectrosonics SPNTWB - Manual (Page 15)

Installation and Startup Guide
Rio Rancho, NM 15
Output Sources
Click on the Output Source tab. These assignments
pass the matrix mixes to the outputs.
Pull down menu for
mix assignment
Output Source screen
Outputs
Click on the Outputs tab. This allows adjustment of
the gain and muting of each output. Level metering is
provided for accurate setup.
Outputs screen
Conference Connections
Click on the Conferencing tab. Conferencing settings
define the behavior of the Codec and Telephone inter-
faces.
Conferencing screen (Telephone Interface setup selected)
Select Telephone, CODEC and
AEC setup screens
Acoustic Echo Canceller
Click on the Acoustic Echo Canceller tab at the bot-
tom of the conferencing screen. The AEC (acoustic
echo canceller) can be enabled on any or all of the
conference interfaces. Strip chart metering indicates the
performance of the AEC on each interface.
Select the desired interface to display, or to display all
four simultaneously.
Select display of individual
or all interface screens
Conferencing screen (AEC setup selected)