Liquid Controls LCR 600 Setup & Op - Manual (Page 20)

20
activating the lcr 600 point-of-sale (poS)
If you ordered the LCR 600 with the POS upgrade, POS was activated in the Liquid Controls factory before shipment.
However, the POS upgrade can also be added to a LCR 600 that was shipped without the POS upgrade.
IntroductIon - poInt-of-Sale actIvatIon
To activate the POs upgrade:
1. Navigate to the Advanced Features screen.
2. Call the Liquid Controls inside sales department at 800-
458-5262 and ask for part number SR600POS.
3. Give the representative the values in the date:,
Calibration #: , and LCR Serial #: displayed on
the Advanced Features screen. The representative will
give you an activation key.
4. Move the pointer  to Activate Point-Of-Sale and
enter the activation key.