Liquid Controls LCR 600 Setup & Op - Manual (Page 61)

61
To print a diagnostic ticket:
1. Press RELEASE on the printer. Insert a blank delivery
ticket.
2. Press FORWARD on the printer to engage the ticket.
3. Turn the LCR 600 selector switch to SHIFT PRINT for
less than 2 seconds and turn the switch to PRINT.
4. When the ticket fi nishes printing, press RELEASE on
the printer. Remove the ticket.
5. Insert a blank delivery ticket and press FORWARD on
the printer to engage the new ticket
Diagnostic Ticket (Calibration Ticket)
diagnostic Tickets and error Message examples
Diagnostic Ticket (Calibration Ticket) continued
dIagnoStIcS - dIagnoStIc tIcKet
Diagnostic tickets can run over the length of a standard
slip printer ticket. Two tickets may be required. When
the printer stops printing, replace the ticket and press
EntEr on the LCR 600.