Magnum Venus Plastech Flex Molding Process PPVS-INFUSION VACUUM - Manual (Page 20)

PPVS Vacuum Sensor Manual
Rev. 03/2013 Page | 20
Connections:
PPVS-INFUSION Valve with IVX3– connecting the IVX3 Injection valve to the PPVS-
INFUSION will allow for automatic Open / Close control of the IVX3 valve based on the
vacuum level. Connect the output signal of the PPVS to the Inject Signal port on the IVX3
valve. Connect the Resin supply Inlet and Outlet as noted above. Connect the Purge
Signal port to a purge valve or flush signal. The PPVS-INFUSION should be positioned
80mm from the IVX3 Injection valve or TAS.
PPVS-INFUSION Valve
Connect the outlet signal of the
PPVS-INFUSION to the Injection port
of the IVX3 valve Connect the outlet signal of the
PPVS-INFUSION to the Injection port
of the IVX3 valve
PPVS-INFUSION Valve
PPVS-INFUSION Valve with IVx3 Injection Valve in Film Adaptors
Inject
Closed
Purge