Magnum Venus Plastech Megaject RTM Pro Revison 7_0 - Manual (Page 13)

Megaject RTM Pro Manual – Revision 7.00 – 13
th
APRIL 2006
Figure 2.3 - Alphanumeric keypad
After the user has successfully logged in to the machine, an INITIALISE button will
appear on the login screen. Press this button in order to navigate to the initialise
screen shown in Figure 2.4. Press the Yes button to begin the initialisation sequence,
which will perform a number operations to prepare the machine for service, including
homing the motors that drive the Progressive Catalyst System (PCR).
NOTE: If any alarms are generated before or during the initialisation process, please
refer to section 5 for guidance.
Figure 2.4 – Initialisation screen
If the machine is successfully initialised, a confirmation message will be displayed,
and an OK button will be displayed. Press this to advance to the main menu screen,
shown in Figure 2.5, which is the central access point for all of the screens used to
operate the Megaject RTM Pro system.
Return key
(Enter)
Backspace