Luminex 100 User Manual Addendum Version 1.7 - Manual (Page 7)

PN 89-00002-00-143 Rev. B 1
This Addendum to the Luminex ® 100 TM User Manual Version 1.7
contains information that became available after the release of the
manual. Some of the topics presented in this addendum were not
published in the previous release; some topics replace information
that exists in the previous manual. Please read through this
addendum to familiarize yourself with the new content.
This addendum contains the following topics:
• Equipment Disposal
• Safety and Regulatory Symbols
• Calibrators
• Storing the Analyzer
• Sample Volume/Sample Dilution
• Cleaning the Analyzer
• Waste Container/Waste Line
• Sheath Delivery System Setup
• Replacing the Sheath Delivery System with Sheath Bottles
• Probe Height Adjustment
• Sheath Fluid
Equipment Disposal
The Waste Electrical and Electronic Equipment Directive 2002/96/
EC requires that you properly dispose of electrical and electronic
equipment when it reaches its end of life.
NOTE: This directive applies to customers in the European Union
(EU) only. Users outside of the EU may disregard this section.
If you are disposing of a Luminex 100 Analyzer, SD TM System, or
XYP TM Instrument, you must decontaminate the system. Refer to the
"Decontamination” appendix in the Luminex ® 100 TM User Manual
Version 1.7 Next, call Luminex Technical Support for a Recycled
Returned Materials Authorization (RMA) number at +1 512-381-
4397 between the hours of 7:00 a.m. to 7:00 p.m. Central Time,
Monday through Friday. You will then return the equipment to:
Luminex Corporation
12201 Technology Blvd., Suite 130
Austin, TX 78727
For information on disposing of the barcode scanner, PC, or monitor,
refer to manufacturer documentation.
Luminex 100 User Manual Version 1.7 Addendum