Luminex xPONENT 4.2 for FLEXMAP - Manual (Page 95)

3. Type the name of the kit in the Name box, the lot number in the Std/Ctrl Kit Lot# box,
the expiration date using MM/DD/YYYY format in the Expiration box, and the
manufacturer in the Manufacturer box.
4. Click Apply Std Lot if you want to apply a standard lot. The Select Lot dialog box
opens. Click a lot and select OK.
5. Click Apply Ctrl Lot to apply a control lot. The Select Lot dialog box opens. Select a lot
and click OK.
6. Alternatively, type the appropriate information in the Assay Standard Information and
Assay Control Information sections. The number of standards, controls, or both in
these sections is defined in the protocol. If your batch uses controls, select Expected,
Low or High from the Show Value options. Use the Apply Values arrows to apply
values down or across the range of analytes.
7. Click Save.
Protocols Tab
Protocols > Protocols
Use this tab to create, export, or delete a protocol. You can also add new assay standard and
or control information using one of the installed protocols.
This tab contains the following:
Create New Protocol - Opens the Settings tab to create a new protocol. For more
information, see "Settings Tab".
Protocols Page
81