Luminex xPONENT for MAGPIX IVD - Manual (Page 19)

5. If you want a description for the batch, type it in the Enter Optional Description box.
• Click the existing protocol that you want to use. If the protocol uses standards and/or
controls, you can view the active reagents. If the selected protocol uses standards/
controls, the next tab that appears is the Stds & Ctrls tab. You can view details about
the active reagents, apply different standards/controls, or manually add new
information on this tab.
• If the selected protocol does not use standards/controls, the next tab that appears is
the Plate Layout tab. You can assign well commands for this batch on this tab.
Confirm that the plate layout conforms to your specific assay instructions.
6. Click Next.
7. Click Run Batch to begin batch acquisition, or click Save to save the batch information
as a pending batch. Pending batches can be run at any time.
NOTE: If the batch spans more than one plate, the tray ejects automatically
when all defined wells have been acquired. A dialog box displays
prompting you to insert the next plate.
Run, Save, and Print Reports
xPONENT ® can provide information in three different report types:
• Batch
• Protocol
• Advanced (User)
It can also format your batch or multibatch results in a variety of export formats.
To run, print, and/or save a report:
1. Open the Results page.
2. Click the Reports tab.
3. In the Report drop-down list, select the report that you want to view.
4. In the Type drop-down list, select the type of report you want to view.
5. Select the item for which you want to generate the report. If you are creating a Batch
Report, select the analytes to include in the report.
For In Vitro Diagnostic Use Running Assays
13