Description, Principles of operation, Fill with ultratane butane – Master Appliance UT-100Si Ultratorch Soldering Iron_Heat Tool User Manual
Page 4
Description
Master Models UT-100Si and UT-200Si Ultratorch heat tools are variable temperature, self-
igniting butane powered, multi-function heat tools. They can be operated as soldering irons or
as flameless heat tools just by changing tips.
Temperature is varied by adjusting the gas control lever.
Ignition Vent
Refill Opening
Knurled Nut
Gas Control
Lever
Fuel Window
"On/Off" Lever
Shutter Lever
Hot Air Exhaust
Hot Air Exhaust Opening
Tip Housing
Principles of Operation
This product uses a catalytic gas reaction sys-
tem. The special catalyst contained in the tip is
preheated with a butane flame. The preheated
flame is extinguished when the shutter is closed
over the ignition vent.
Butane gas continues to flow over the preheated
catalyst generating infrared heat which is either
conducted through the soldering iron tip or
passed through the heat tip as hot gas.
Tinned
Hot Air Vent Catalyst
Evaporated
Gas
Chrome Plated Copper Base
Iron Plated
Unit operates on butane gas and creates infared heat effectively
by the use of a catalyst. Use only Master Ultratane butane with
your Ultratorch. Make sure on/off lever is in “off” position before
filling. To fill, press nozzle of butane can down onto refill opening.
Unit is full when gas overflows refill opening. Check window for
fuel level.
Fill with Ultratane Butane