Axis Communications 230 MPEG-2 - Manual (Page 30)

The System Options AXIS 230 30
System Options Overview
The table below provides a brief overview of the System Options. Each section is explained
in more detail in the pages that follow.
Users
To prevent any unauthorized use of the product, the AXIS 230 supports multi-level and
multi-user password protected access. A maximum of 20 users can be defined. An
Administrator has unrestricted access to the product's administration tools and can
determine the registration and rights for all other users.
The Users List displays all of the users currently defined. The administrator user name
(root) is permanent and cannot be deleted. The default password (pass), however, can and
should be changed.
Important!
Administration Description
Security - Users Create and delete users and passwords, and modify the Administrator’s password.
Security - Firewall Settings Protect your AXIS 230 against unauthorized access, using the built-in firewall. Allowed IP addresses
and protocols can be specified.
Date & Time Set the system time, manually or automatically.
Network - TCP/IP Settings Configure TCP/IP settings, enable BOOTP/DHCP and restrict bandwidth.
Network - SMTP (email)
Settings Configure SMTP-settings for sending e-mail messages notifying recipients of recordings, error
messages, system messages, etc.
Network - RTP (multicast)
settings Enable and configure multicast IP addresses and ports.
Ports & Devices - I/O Ports Enable and configure the 2 inputs and 1 output.
Ports & Devices - RS-232 &
RS-485 Configure the COM-ports for Generic TCP/IP, Generic HTTP or for a Pan Tilt device.
Maintenance Provides tools for restarting the camera and for resetting to the factory default settings.
Support - Overview Provides links to various types of useful information, including how to contact Axis support services.
Support - Logs & Reports Contains links to various log files and reports.
Support - About Displays information about the development of the product.
• Note that if the root password is not changed, then the Enable anonymous viewer login checkbox
will have no effect, checked or not.
• The Enable anonymous viewer login checkbox will, after the root password has been changed, be dis-
abled by default.
• All Axis products are shipped with the same default Administrator password.
• Changing the root password and, later, changing it back to pass will return the security function to
its original state.