Axis Communications 230 MPEG-2 - Manual (Page 55)

AXIS 230 Technical Specifications 55
Appendix F - Technical Specifications
System Requirements - Windows® 2000 or Windows XP (with latest Service Pack.) AGP
graphics card with 16 MB video memory and support for DirectDraw®. Use the latest
available driver. Internet Explorer 5.5 or higher (with latest Service Pack.) DirectX® (latest
version.)
Installation - Physical network connection using RJ-45 twisted pair cable. 10baseT or
100baseTX Fast Ethernet.
Management - Remote configuration and status using Web-based tools.
Video Features - MPEG-2 video compression. Configurable resolution, color and quality
levels.
Audio In - One 3.5mm input for stereo or mono microphone, or for line-in stereo or mono
signal. The logical port is selected in the web interface.
Stereo microphone input - High sens. Max:-39.0 dBu (25 mVpp)
Stereo microphone input - Low sens. Max:-18.1 dBu (270 mVpp)
Line input - Max:+2.7 dBu (3.0 Vpp)
Supported Network protocols - TCP/IP, HTTP, FTP, SMTP, NTP, ARP, DHCP, BOOTP, RTP
Terminal block connector - 2 digital inputs (max 12 V in) and 1 transistor output (max 24 V,
0.1 A). 1 pin for ground. 2 pins for RS-485 serial communication.
Pre/Post Alarm Buffer - Approximately 15 MB memory for storage of pre/post alarm video.
Serial Connector - One 9-pin D-Sub RS-232, max 115 Kbit/s.
Pan/Tilt - Pan/Tilt support via RS-232 or RS-485 for remote camera control. See
www.axis.com or the online help for information about supported devices.
Security - Multi-user and multi-level password protection.
Operating Conditions: - Temp: +5
o
to +50
o
C (41
o
to 122
o
F). Humidity: 20-80% RH.
Illumination - Min illumination = 0,7 lux (at F1.4 1/60s NTSC or 1/50s PAL) (50IRE) (down
to 0.01 lux, depending on shutter speed.) Recommended illumination: 100 to 100.000 lux.