Micromod MOD: 30ML and Modcell Maintenance for 2001N, 2002N, and 1800R - Manual (Page 40)

MOD30ML and Modcell Maintenance
VIEWING DIAGNOSTIC DATA
• Event Code and Message Text - Each diagnostic in a block has a unique code
number (8 in the example), and a brief text message (WRIM MODULE ERROR) is
appended to the code to indicate the nature of the problem.
Use the block type and event code to locate the diagnostic description and corrective action
listed in Section 7. The description/action listed for WRIM, code 8 states that the module has
reported an extended error code, and references Section 5, which provides detailed
information about the error.
Figure 3. 22. Instrument Status – Application Builder
Another example of the message returned in response to an R DIAGS command is:
IF1 ACK_ONLY UAK G CLR G
14 INSTRUMENT POWERED UP
IF1 ACK_ONLY UAK G CLR G
14 INSTRUMENT POWERED DOWN
This message, as it appears on the status display, is shown in the next figures for viZapp.
The information contained is as follows:
• Block Type and Occurrence Number - This identifies the block reporting the
diagnostic (IF1 in the example).
• Classification of the diagnostic:
o NEW/CLR - Diagnostics having a sustained active state, which is cleared
when normal conditions are restored.
3 -24